Brazing
The checklist addresses questions about working methods and protective equipment when brazing.
Questions
Questions
Brazing
| Document name |
|---|---|
Brazing | |
| Area/location | Date |
Invalid Date | |
| Approved by | Participants |
| Description | The list is based on the following regulations |
The checklist addresses questions about working methods and protective equipment when brazing. |
Method
| Question | Yes | No | N/A | Risk assessment: | Action | Responsible | Latest completion date | Control | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Low | Medium | High | ||||||||
| 1. Is there always a fire guard present when soldering? |
|
|
|
| ||||||
| 2. Is the copper surface cleaned of oil and grease before soldering copper pipes? |
|
|
|
| ||||||
| 3. When soldering copper pipes, is the work area tidy and free of flammable material? |
|
|
|
| ||||||
| 4. Is nitrogen gas always used as a shielding gas when soldering copper pipes? |
|
|
|
| ||||||
| 5. When soldering copper pipes, is overheating of copper pipes avoided? |
|
|
|
| ||||||
| 6. Is spot extraction used when soldering copper pipes in poorly ventilated work areas? |
|
|
|
| ||||||
| 7. Has the soldering equipment and pressure regulators been checked to ensure they are in good condition? |
|
|
|
| ||||||
| 8. Are the gas cylinders handled safely during soldering? |
|
|
|
| ||||||
| 9. Visible pipelines containing a hazardous chemical product are marked with the name of the product and hazard pictogram, as well as with an arrow for the direction of flow. |
|
|
|
| ||||||
Protective equipment
| Question | Yes | No | N/A | Risk assessment: | Action | Responsible | Latest completion date | Control | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Low | Medium | High | ||||||||
| 1. Does the person soldering use personal protective equipment such as protective clothing made of anti-flame treated cotton? |
|
|
|
| ||||||
| 2. Does the person soldering use personal protective equipment such as a respirator with particle and gas filters? |
|
|
|
| ||||||
| 3. Does the person soldering use personal protective equipment such as a heating glove? |
|
|
|
| ||||||
| 4. Does the person soldering use personal protective equipment such as dark goggles? |
|
|
|
| ||||||
| 5. Is a written work permit obtained from the employer when working in an enclosed space? |
|
|
|
| ||||||
Information
| Question | Yes | No | N/A | Risk assessment: | Action | Responsible | Latest completion date | Control | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Low | Medium | High | ||||||||
| 1. Are the written work environment management and safety commissions available at the workplace? |
|
|
|
| ||||||
| 2. Does an employee working with welding or cutting have sufficient knowledge for the job? |
|
|
|
| ||||||
| Other Here you can note risks that need to be addressed that are not included in the checklist |
|---|
© Prevent – Arbetsmiljö i samverkan Svenskt Näringsliv, LO och PTK
More checklists can be found at www.prevent.se/checklistor